DLE Section : Design Plans

The Library of DLE Design plans.


Prototypes Under Development (FREE)

Here are the list of the prototypes which are under development process. These designs are to be released when they have been build and tested for performance approval.

Some prototype design plans are available as FREE DOWNLOAD. Please note that the FREE Design Plans has not been tested for its flight performance.

 

Proto FPV Trainer Rev1

 

FPV trainer

 

 

 

 

 

 

 

A Prototype design for MESA rcFF (www.mesarc.club).

MF-XA-20, Razorback

FREE DOWNLOAD

 

 

 

 

 

 

A Prototype design for MESA rcFF (www.mesarc.club).

MF-FFR-31, Sylphid

FREE DOWNLOAD

 

 

 

 

 

 

A Prototype design for MESA rcFF (www.mesarc.club).

MF-CFA-44, Nosferatu

FREE DOWNLOAD

 

 

 

 

 

 

 

A forward-sweep wing for extreme and unique maneuverability.


Nosferatu

MF-CFA-44 RevA

 

 

 

 

 

 

 

MF-CFA-44

        Nosferatu

   

Wingspan                     : 855 mm ( 33.66 inch )

Length                          : 1184 mm ( 46.61 inch )

Height                           : 195 mm ( 7.67 inch )

 

This is a pusher parkjet. This design is based on the fictional / experimental aircraft. With the collaboration with MESARC ( www.mesarc.club ) and the permission by Jake Marshall, this prototype design provides the additional MESArcff fleet collection.

The Nosferatu consists of 2 Elevons on a delta wing layout and optional rudders on the vertical stabilizers.

 

DP-CFA-44 Preview Rev0

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

Simple instruction will guide you to construct the plane.

Released Revision : A

 



Please fill in the form below for a free download.

get adobe reader


Sylphid

MF-FFR-31 RevA

 

 

 

 

 

 

 

 

MF-FFR-31

        Sylphid

   

Wingspan                     : 771 mm ( 30.35 inch )

Length                          : 875 mm ( 34.44 inch )

Height                           : 196 mm ( 7.71 inch )

 

This is a pusher parkjet. This design is based on the fictional / experimental aircraft. With the collaboration with MESARC ( www.mesarc.club ) and the permission by Jake Marshall, this prototype design provides the additional MESArcff fleet collection.

The Sylphid consists of 2 AIlerons and 2 Elevators ( The Ailerons and Elevators can be configured as 4 X Elevons for more aggressive maneuvers ) and optional rudders on the vertical stabilizers.

 

DP-FFR-31 Preview Rev0

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

Simple instruction will guide you to construct the plane.

Released Revision : A

 



Please fill in the form below for a free download.

get adobe reader


Razorback

MF-XA-20 RevA

 

 

 

 

 

 

 

 

MF-XA-20

        Razorback

   

Wingspan                     : 1012 mm ( 39.84 inch )

Length                          :  926 mm ( 36.45 inch )

Height                           : 159 mm ( 6.25 inch )

 

This is a pusher parkjet. This design is based on the fictional / experimental aircraft. With the collaboration with MESARC ( www.mesarc.club ) and the permission by Jake Marshall, this prototype design provides the additional MESArcff fleet collection.

The Razorback consists of 2 Ailerons and 2 Elevators ( The Ailerons and Elevators can be configured as 4 X Elevons for more aggressive maneuvers ).

 

DP-XA-20 Preview Rev0

 

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

Simple instruction will guide you to construct the plane.

Released Revision : A



Please fill in the form below for a free download.

get adobe reader


The Automaton

 

 

 

DLE-JW02-A2

        The Automaton

   

Wingspan                      : 1520 mm ( 59.84 inch )

Length                           : 788 mm ( 31.02 inch )

Height                            : 308 mm ( 12.12 inch )

Estimated A.U.W            : 1856 g – 2200 g ( 65.46 oz – 77.60 oz )

 

The automaton is designed to serve as a suitable platform for FPV/UAV mission. Besides the amount of payload carrying capability, flight efficiency also becomes the main priority in the design consideration. The FPV gears which consist of CCD camera, AV transmitter, OSD, etc; could be incorporated with the autopilot modules in order to provide aerial view through a ground control station in an autonomous flight mission. To achieve complete information, airspeed sensor, GPS, OSD telemetry and data link Tx/Rx should be included in the autopilot modules.

DLE-JW02-A2 Preview Rev0

 

 

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

It also includes the build guide with instruction to construct the model with sequential steps and pre-steps.

 

Released Revision : 00

Price : USD $9.95

New Price : USD $5.00

 

Please notes: the transaction will be processed to PayPal™ account, “darius.tjioe@gmail.com”, which belongs to the sole owner of D.L. Engineering.




 
get adobe reader

PayPal Acceptance Mark