Tag Archives : glider

Glider DLE-GL02-00 Flight


Scratch Build Glider presented by Angel Gendut Productions.


Aircraft Platform : DLE-GL02-00


Tested Drive system :

  • Brushless motor : Revox 2808-1900kv
  • Speed Controller : Emax ESC 30A with internal linear BEC 5V/2A
  • Electric Nylon Propeller : Revox 6x4E
  • Servos : 4 x HXT (Hextronik) MG14, Metal Gear servo
  • Li-Po Batt : Revox 3S-2200mAh (30C) Nano Tech  OR  Emax Tipple 3S-1800mAh (20C)


Radio Tx/Rx system:

  • Tx : Futaba T8FG Super, 2.4 GHz transmitter
  • Rx : Futaba R6028SB, 8ch 2.4 GHz receiver


Design review :

  • Airbrake mixing is implemented to alter the elevator position for take-off (overhead hand-launch).
  • The wing aspect ratio provides a good glide ratio when the wind condition is calm and/or catching rising thermal.
  • The motor power is too high for the required spec, even though the motor weight is small. (high power to weight ratio).


Flight photos are available at Joni DLE google +


Music By: T-Mass “Neglected Perfection” , Myriad ft. Jess Abran “Contrast”
Album: Dubstep.NET Exclusives

The Glider

DLE-GL02-00 the glider





DLE-GL02-00 PIC01


DLE-GL02-00 PIC02



        The Glider


Wingspan                      : 1561 mm ( 61.45 inch )

Length                           : 1020 mm ( 40.15 inch )

Height                            : 236 mm ( 9.29 inch )

Estimated A.U.W            : 650 g – 700 g ( 22.9 oz – 24.7 oz )


This is a glider type aircraft. This glider is able to soar up high in the sky, gliding with the wind , as well as the rising thermal. The wing is long and slender to produce high aspect ratio. The detachable wing enables easy and convenient transport.

DP-GL02-00 Preview Rev0

BG-GL02-00 Preview Rev0

PDF Design Plans ( tiled A4-size ) 


Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

It also includes the build guide with instruction to construct the model with sequential steps and pre-steps.


Released Revision : 00

Price : USD $7.64

New Price : USD $5.00


Please notes: the transaction will be processed to PayPal™ account, “darius.tjioe@gmail.com”, which belongs to the sole owner of D.L. Engineering.


get adobe reader


PayPal Acceptance Mark






DLE: Prototyping Glider DLE-GL01-01

The revised prototype design of DLE-GL01-01. Increased wingspan to 1.4m with 8°-10º dihedral KFm2 wing. Control surfaces : 2 Flaperons, 1 Elevators and 1 Rudder.

DLE: Prototyping Glider DLE-GL01-00

The first prototype testing of DLE-GL01-00 , original design by DLE, A swift glider type plane. 2 Flaperons, 1 elevator and 1 rudder for control surfaces. KFm2 Airfoil is equipped to produce sufficient lift.