Tag Archives : Scratch Build


Nosferatu

MF-CFA-44 RevA

 

 

 

 

 

 

 

MF-CFA-44

        Nosferatu

   

Wingspan                     : 855 mm ( 33.66 inch )

Length                          : 1184 mm ( 46.61 inch )

Height                           : 195 mm ( 7.67 inch )

 

This is a pusher parkjet. This design is based on the fictional / experimental aircraft. With the collaboration with MESARC ( www.mesarc.club ) and the permission by Jake Marshall, this prototype design provides the additional MESArcff fleet collection.

The Nosferatu consists of 2 Elevons on a delta wing layout and optional rudders on the vertical stabilizers.

 

DP-CFA-44 Preview Rev0

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

Simple instruction will guide you to construct the plane.

Released Revision : A

 



Please fill in the form below for a free download.

get adobe reader


Sylphid

MF-FFR-31 RevA

 

 

 

 

 

 

 

 

MF-FFR-31

        Sylphid

   

Wingspan                     : 771 mm ( 30.35 inch )

Length                          : 875 mm ( 34.44 inch )

Height                           : 196 mm ( 7.71 inch )

 

This is a pusher parkjet. This design is based on the fictional / experimental aircraft. With the collaboration with MESARC ( www.mesarc.club ) and the permission by Jake Marshall, this prototype design provides the additional MESArcff fleet collection.

The Sylphid consists of 2 AIlerons and 2 Elevators ( The Ailerons and Elevators can be configured as 4 X Elevons for more aggressive maneuvers ) and optional rudders on the vertical stabilizers.

 

DP-FFR-31 Preview Rev0

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

Simple instruction will guide you to construct the plane.

Released Revision : A

 



Please fill in the form below for a free download.

get adobe reader


Razorback

MF-XA-20 RevA

 

 

 

 

 

 

 

 

MF-XA-20

        Razorback

   

Wingspan                     : 1012 mm ( 39.84 inch )

Length                          :  926 mm ( 36.45 inch )

Height                           : 159 mm ( 6.25 inch )

 

This is a pusher parkjet. This design is based on the fictional / experimental aircraft. With the collaboration with MESARC ( www.mesarc.club ) and the permission by Jake Marshall, this prototype design provides the additional MESArcff fleet collection.

The Razorback consists of 2 Ailerons and 2 Elevators ( The Ailerons and Elevators can be configured as 4 X Elevons for more aggressive maneuvers ).

 

DP-XA-20 Preview Rev0

 

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

Simple instruction will guide you to construct the plane.

Released Revision : A



Please fill in the form below for a free download.

get adobe reader


The UAV Automaton, DLE-JW02-A2, development phase 03

 

 

The Automaton is presented by Angel Gendut Productions.

 

UAV / FPV Platform : DLE-JW02-A2

Development Phase 03 : Efficient propulsion system and Autopilot Test part 02

 

Wing Span             : 1.5 m

Control Surface     : 2 Flaps and 2 Ailevators

Tested A.U.W         : 2.2 kg

 

Tested Drive system :

  • Brushless motor : Emax BL 2815/09, 920kv
  • Speed Controller : Emax 60A ESC
  • Electric Nylon Propeller : Revox 9x6E
  • Servos : 4 x Emax ES08MD Digital, Metal Gear servo
  • Li-Po Batt : Revox Nanotech 4S-5500mAh (30C)
  • 50 grams of solid lead (As counter-weight)

 

Radio Tx/Rx system :

  • Tx : Futaba T8FG Super, 2.4 GHz transmitter
  • Rx : Futaba R6028SB, 8ch 2.4 GHz receiver

 

FPV system :

  • FPV cam : 1/3 ” Sony CCD camera, 700VTL
  • Belly cam: GoPro Hero 3 Black Edition camera
  • AV Transmitter : Aomway  5.8GHz, 1000mW, clover-leaf antenna
  • AV Receiver : Aomway 5.8GHz, built-in DVR, clover-leaf antenna
  • FPV ground monitor : Feelworld 7 Inch

 

Flight Controller :

  • FeiyuTech FY-41AP Autopilot and OSD system

 

Flight debrief :

  • 50 grams of solid lead is attached to the cockpit as a counter weight to achieve the proper C.O.G; resulting in 2.2kg of A.U.W.
  • Airbrake mixing is implemented to preset the flaps and ailevators positions for hand-launch take-off and landing.
  • The new setup is more efficient for long duration flight; the test flight lasted for 15 minutes with 11 km of flight mileage and consumed 4000 mAh of battery capacity. Max airspeed at 76 km/h and cruise speed of 64 km/h. Take-off max current at 42A and cruise speed current at 15A.
  • Test flight altitude at 48m – 122m.
  • The ABM (Auto Balance Mode) flight mode operations is still not properly tuned due to the rolling right and losing altitude characteristics. The autopilot modules need further tuning and calibration.
  • The data link with GCS (Ground Control Station) interface is yet to be tested.
  • Waypoint navigation for fully-autonomous flight is yet to be tested.

 

Flight photos are available at Joni DLE google +

 

Music By:

Varien, Monstercat release

  • “Gunmetal Black”
  • “The Scarlet Dawn”

The UAV Automaton, DLE-JW02-A2, development phase 02

 

 

The Automaton is presented by Angel Gendut Productions.

 

UAV / FPV Platform : DLE-JW02-A2

Development Phase 02 : FPV and Autopilot system

 

Wing Span             : 1.5 m

Control Surface     : 2 Flaps and 2 Ailevators

Tested A.U.W         : 2.2 kg

 

Tested Drive system :

  • Brushless motor : Turnigy G10, 810kv, 375W
  • Speed Controller : Turnigy Trust 55A SBEC with internal switch-mode BEC 5.5V/3A
  • Electric Nylon Propeller : Revox 12x6E
  • Servos : 4 x Emax ES08MD Digital, Metal Gear servo
  • Li-Po Batt : Zippy Compact 4S-2200mAh (35C)
  • 308 grams of solid lead (As weight simulation)

 

Radio Tx/Rx system :

  • Tx : Futaba T8FG Super, 2.4 GHz transmitter
  • Rx : Futaba R6028SB, 8ch 2.4 GHz receiver

 

FPV system :

  • FPV cam : 1/3 ” Sony CCD camera, 700VTL
  • Belly cam: GoPro Hero 3 Black Edition camera
  • AV Transmitter : Aomway  5.8GHz, 1000mW, clover-leaf antenna
  • AV Receiver : Aomway 5.8GHz, built-in DVR, clover-leaf antenna
  • FPV ground monitor : Feelworld 7 Inch

 

Autopilot system :

  • FeiyuTech FY-41AP Autopilot and OSD system

 

Flight debrief :

  • 308 grams of solid lead is attached to the cockpit to simulate the additional weight when a high capacity battery is being used; resulting in 2.2kg of A.U.W.
  • Airbrake mixing is implemented to preset the flaps and ailevators positions for hand-launch take-off and landing.
  • The drive system is inefficient for long duration flight; the test flight lasted for 4 minutes with 3.9km of flight mileage and consumed 1400 mAh of battery capacity. Max airspeed at 86 km/h and cruise speed of 68 km/h. Take-off max current at 42A and cruise speed current at 26A.
  • Test flight altitude at 50m – 60m.
  • Larger capacity battery is required for thorough test flight. And it is recommended to change the drive system with better efficiency ( motor, prop, ESC and battery combination ).
  • The ABM (Auto Balance Mode) and ACM (Auto Circle Mode) flight mode operations are not properly tuned due to the losing altitude characteristics. The autopilot modules need further tuning and calibration.
  • The RTL ( Return To Launch ) flight mode is yet to be tested.
  • The data link with GCS (Ground Control Station) interface is yet to be tested.
  • Waypoint navigation for fully-autonomous flight is yet to be tested.

 

Flight photos are available at Joni DLE google +

 

Music By:

  • Karl Jenkins “Palladio”, Luke Da Duke Remix
  • Monty “Horizon”, Album : Dubstep.NET Exclusive