Tag Archives : Scratch Build


FPV with GoPro camera

 

 

GoPro FPV DLE-TR01 is presented by Angel Gendut Productions.

 

FPV Platform : DLE-TR01, The Sport Trainer

 

Tested Drive System :

  • Revox 2808-1900kv, 150W
  • Emax ESC 30A
  • Emax UBEC 3A
  • Revox 8x4E Prop
  • Emax ES08MD Digital, Metal Gear servo
  • Revox 3S-2200mAh (30C) Nano Tech

 

Tx/Rx System :

  • JR Propo XG-7, 2.4 GHz transmitter
  • JR Propo RG831B, 8ch 2.4 GHz receiver

 

FPV Gear :

  • GoPro Hero 3 Black Edition camera
  • Aomway AV Transmitter, 5.8GHz, 1000mW, clover-leaf antenna
  • Aomway AV Receiver, 5.8GHz, built-in DVR, clover-leaf antenna
  • Feelworld 7 Inch FPV ground monitor
  • Revox 3S-900mAh (20C) Nano Tech [ For AV transmitter ]
  • Revox 3S-2200mAh (30C) [ For AV Receiver ]

 

Design Review :

  • Flaperons mixing is implemented, along with 3 position switch for take-off (overhead hand-launch), level flight, and landing.
  • Wing loading is sufficient for carrying the FPV camera, the AV Transmitter and the extra Li-Po Batt for the transmitter.
  • GoPro camera acts as the recording aerial feed, as well as the FPV aerial feed to the ground monitor.

 

Music By: Rameses B “Transformations” feat. Laura Brehm


DLE-FJ-50-00 Flight


 

The Scratch Build T-50 PAK FA is presented by Angel Gendut Productions.

Airframe : DLE-FJ-50-00, Cyxoй ΠAK ΦA

 

Tested Drive system :

  • Revox 2809 – 1900kv, 150W
  • Emax 30A ESC
  • Revox 6x4E Prop
  • Emax ES08MD Digital, Metal Gear servo
  • Emax Tipple 3S Li-Po 1800mAh (20C)

 

Tx/Rx system:

  • JR Propo XG-7, 2.4 GHz transmitter
  • JR Propo RG831B, 8ch 2.4 GHz receiver

 

Music By: Hard Rock Sofa & Swanky Tunes “Here We Go”


DLE-FJ-14-00 Flight


 

The Scratch Build F-14 is presented by Angel Gendut Productions

Airframe : DLE-FJ-14-00, The Speed Demon

 

Tested Drive system :

  • Revox 2809 – 1900kv, 150W
  • Emax 30A ESC
  • Revox 6x4E Prop
  • Emax ES08MD Digital, Metal Gear servo
  • Emax Tipple 3S Li-Po 1800mAh (20C)

 

Tx/Rx system:

  • JR Propo XG-7, 2.4 GHz transmitter
  • JR Propo RG831B, 8ch 2.4 GHz receiver

 

Music By: Linkin Park “Given up”


The Automaton

 

 

 

DLE-JW02-A2

        The Automaton

   

Wingspan                      : 1520 mm ( 59.84 inch )

Length                           : 788 mm ( 31.02 inch )

Height                            : 308 mm ( 12.12 inch )

Estimated A.U.W            : 1856 g – 2200 g ( 65.46 oz – 77.60 oz )

 

The automaton is designed to serve as a suitable platform for FPV/UAV mission. Besides the amount of payload carrying capability, flight efficiency also becomes the main priority in the design consideration. The FPV gears which consist of CCD camera, AV transmitter, OSD, etc; could be incorporated with the autopilot modules in order to provide aerial view through a ground control station in an autonomous flight mission. To achieve complete information, airspeed sensor, GPS, OSD telemetry and data link Tx/Rx should be included in the autopilot modules.

DLE-JW02-A2 Preview Rev0

 

 

 

PDF Design Plans ( tiled A4-size ) 

 

Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

It also includes the build guide with instruction to construct the model with sequential steps and pre-steps.

 

Released Revision : 00

Price : USD $9.95

New Price : USD $5.00

 

Please notes: the transaction will be processed to PayPal™ account, “darius.tjioe@gmail.com”, which belongs to the sole owner of D.L. Engineering.




 
get adobe reader

PayPal Acceptance Mark

 

 

 


The UAV Automaton, DLE-JW02-A2, development phase 01

The Automaton is presented by Angel Gendut Productions.

 

UAV / FPV Platform : DLE-JW02-A2

Development Phase 01 : Airframe performance test

 

Wing Span             : 1.5 m

Control Surface     : 2 Flaps and 2 Ailevators

Tested A.U.W         : 1.9 kg

 

Tested Drive system :

  • Brushless motor : Turnigy G10, 810kv, 375W
  • Speed Controller : Turnigy Trust 55A SBEC with internal switch-mode BEC 5.5V/3A
  • Electric Nylon Propeller : Revox 12x6E
  • Servos : 4 x Emax ES08MD Digital, Metal Gear servo
  • Li-Po Batt : Turnigy nano-tech 4S-2200mAh (35C-70C)  OR  Zippy Compact 4S-2200mAh (35C)
  • 409 grams of solid lead (As weight simulation)

 

Radio Tx/Rx system:

  • Tx : Futaba T8FG Super, 2.4 GHz transmitter
  • Rx : Futaba R6028SB, 8ch 2.4 GHz receiver

 

Design review :

  • 409 grams of solid lead is attached to the cockpit to simulate the payload of FPV and autopilot gears; resulting in 1.9kg of A.U.W.
  • Airbrake mixing is implemented to preset the flaps and ailevators positions for hand-launch take-off and landing.
  • The Automaton is easy for hand-launch take-off, easy for maneuvers, has sufficient lift production for carrying large amount of payload, has lots of thrust for both high and low speed flight.
  • Flaps are proved to be effective during the emergency landing procedure; it is also used during a low speed/cruise flight.
  • Implement average throttle range of 30% – 60% for efficient flight to increase flight duration.
  • 3S Li-Po batt is yet to be tested to further improve the flight duration.
  • FPV gears are to be mounted in the next development phase; followed by Autopilot modules with data link.

 

Flight photos are available at Joni DLE google +

 

Music By: Hans Zimmer “Crysis 2 OST”