Tag Archives : sport trainer

FPV with GoPro camera



GoPro FPV DLE-TR01 is presented by Angel Gendut Productions.


FPV Platform : DLE-TR01, The Sport Trainer


Tested Drive System :

  • Revox 2808-1900kv, 150W
  • Emax ESC 30A
  • Emax UBEC 3A
  • Revox 8x4E Prop
  • Emax ES08MD Digital, Metal Gear servo
  • Revox 3S-2200mAh (30C) Nano Tech


Tx/Rx System :

  • JR Propo XG-7, 2.4 GHz transmitter
  • JR Propo RG831B, 8ch 2.4 GHz receiver


FPV Gear :

  • GoPro Hero 3 Black Edition camera
  • Aomway AV Transmitter, 5.8GHz, 1000mW, clover-leaf antenna
  • Aomway AV Receiver, 5.8GHz, built-in DVR, clover-leaf antenna
  • Feelworld 7 Inch FPV ground monitor
  • Revox 3S-900mAh (20C) Nano Tech [ For AV transmitter ]
  • Revox 3S-2200mAh (30C) [ For AV Receiver ]


Design Review :

  • Flaperons mixing is implemented, along with 3 position switch for take-off (overhead hand-launch), level flight, and landing.
  • Wing loading is sufficient for carrying the FPV camera, the AV Transmitter and the extra Li-Po Batt for the transmitter.
  • GoPro camera acts as the recording aerial feed, as well as the FPV aerial feed to the ground monitor.


Music By: Rameses B “Transformations” feat. Laura Brehm

The Sport Trainer

  DLE-TR01-00 PIC01 Rev0



DLE-TR01-00 PIC02 Rev0                 DLE-TR01-00 PIC03 Rev0




        The Sport Trainer  


Wingspan                      : 980 mm ( 38.6 inch )

Length                           : 960 mm ( 37.8 inch )

Height                            : 218 mm ( 8.6 inch )

Estimated A.U.W            : 800 g – 1000 g ( 28 oz – 35.3 oz )


This is a sport, high wing pusher trainer plane. The short wingspan makes the plane compact and agile. This plane is designed with KFm2 airfoil so as to increase lift for higher payload ( basic fpv gear ), and yet still easy to maneuver.

DP-TR01-01 Preview Rev0

BG-TR01-01 Preview Rev0

PDF Design Plans ( tiled A4-size ) 


Design plans consists of the model’s detail specification, the required material and components, the recommended flight setups, assembly diagram, the parts’ template and etc.

It also includes the build guide with instruction to construct the model with sequential steps and pre-steps.


Released Revision : 01

Price : USD $5.54

New Price : USD $ 5.00


Please notes: the transaction will be processed to PayPal™ account, “darius.tjioe@gmail.com”, which belongs to the sole owner of D.L. Engineering.


get adobe reader

PayPal Acceptance Mark

DLE: Prototyping UAV/FPV DLE-TR01-00

The prototyping original design of sport trainer DLE-TR01-00. Equipped with KFm2 Airfoil to produce sufficient lift for carrying basic FPV/UAV gears. Equipped with 2 flaperons, 1 elevator and 1 rudder as the control surfaces.